NEWS

What is the wedge brake adjustment method

What is the wedge brake adjustment method

Pull out the rubber plug of the adjustment observation hole and the clearance observation hole on the protection plate, check the clearance between the brake shoe and the brake drum, and adjust the working state of the nut.

21

2023

/

07

Introduction of Rack Type Automatic Adjusting Arm？

Introduction of Rack Type Automatic Adjusting Arm？

The rack-type automatic adjustment arm of this project is connected with a control arm with a control ring on the side of the automatic adjustment arm housing, and an annular gap is provided on the control ring, and the clutch with a rack is connected by the annular gap; the clutch is sleeved Worm, one end of the worm is connected with a compression spring, and the other end bears against the front end cover.

21

2023

/

07

Precautions for using the automatic adjusting arm

Precautions for using the automatic adjusting arm

The automatic adjustment arm is designed to preset different brake clearance values according to different axle models. In normal use, if the gap exceeds the limit, the brake adjustment arm will drive the internal one-way clutch mechanism to reduce the gap value by one gear when the braking action is completed, so that the brake gap can be kept in a correct range.

21

2023

/

07

< 1 >

AODI looks forward to cooperating with you

START COGPERATION

Contact

TEL: 0576-87286058  87286157

FAX: 0576-87286087

Mail: aodi@zjaodi.com

ADD:Automobile and Motorcycle Industrial Park, Yuhuan County, Zhejiang Province

Sitemap

Mobile terminal

CopyRight © 2023 ZHEJIANG AODI MACHINERY MANUFACTURING CO.，LTD.     Powered by: 300.cn    SEO